4G LTE 14dBi Outdoor Directional Panel Antenna 800-2600MHz

Name: 4G LTE 14dBi Outdoor Panel Antenna 800-2600MHz
Brand: OEM
Price: 55.33 EUR
Availability: OutOfStock

out of stock

55.33 €

out of stock

55.33 €

Product name

4G LTE 14dBi Outdoor Panel Antenna 800-2600MHz

Warranty

12 months

Manufacturer part number

L14-8-26-NF2

EAN

0708747434460

Available alternatives

QuMax for RUTX09

106.19 €89.00 €

-16%

QuMax XR2 Bi-Directional Kit for RUTX12

224.24 €179.00 €

-20%

QuPanel LTE High Power SISO, 10m cable

81.62 €67.00 €

-18%

Detailed description

Directional Cellular Antenna

The L14-8-26-NF2 is a directional panel antenna for fixed cellular installations using compatible 3G UMTS, 4G LTE, and 5G NR equipment. It covers the 800–2600 MHz range, allowing one antenna to support the listed cellular technologies across several frequency bands. Gain varies by band, reaching 10 dBi at 800–900 MHz and 14 dBi at 1800–2600 MHz. This frequency-dependent performance helps the antenna provide focused signal reception and transmission across both lower and higher parts of its operating range. The directional panel design is intended for installations where the serving base station can be identified and the antenna can be aimed accurately toward it.

A 2x2 MIMO configuration provides two antenna paths within one panel, supporting compatible devices that use two cellular antenna connections. The antenna applies linear horizontal and vertical polarisation, while two N-Female connectors provide the corresponding RF interfaces. Its 30° horizontal and 25° vertical beamwidth creates a concentrated coverage area, making careful alignment important during installation. A VSWR of no more than 1.6 and 50-ohm impedance define the antenna’s matching characteristics, and the maximum input power is 50 W. Before deployment, the connected device should be checked for the required cellular bands and connector type so that the complete RF system is compatible before installation at the selected location.

Mounting and Environment

The antenna is suitable for both indoor and outdoor operation and can be installed on a mast, pole, or wall handle. These mounting options allow the panel to be positioned according to the available structure and directed toward the serving base station. Because the radiation pattern is focused, the mount should permit precise adjustment and secure fixing after alignment. An operating temperature range of −30 to +75 °C supports use across widely varying environmental conditions. The antenna is also rated for wind speeds up to 200 km/h, which should be considered when selecting the mounting surface, support structure, and fastening method for exposed outdoor locations.

The white panel measures 470 × 310 × 50 mm and weighs 1.5 kg, giving installers clear parameters for planning clearance, mounting space, and structural support. Its rectangular housing combines the antenna elements in one enclosure, while the 50 mm depth should be taken into account where the unit is mounted close to a wall or other equipment. The dimensions also help determine whether the selected mast, pole, or wall position provides enough room for orientation and adjustment. Product code L14-8-26-NF2 identifies this specific model when selecting a compatible directional antenna for fixed cellular installations. Correct placement, firm mounting, and accurate alignment are essential to use the antenna within its stated operating and environmental parameters.

Technical Specs / Datasheet

Technical Specs / Datasheet - 4G LTE 14dBi Outdoor Panel Antenna 800-2600MHz

Compatible products

CC-CF200MNG

Coaxial Cable LMR200 for LTE 4G 5G Routers, Gold Connectors

21.08 €

Specifications

Mobile Network

Mobile Network Generation

3G (UMTS), 4G (LTE), 5G (NR)

Antenna

Antenna Design

Panel

Mobile Antenna Frequency Range & Gain

0.800 - 0.900 (GHz) 10 (dBi), 1.800 - 2.600 (GHz) 14 (dBi)

Mobile Antenna Gain

10 dBi, 14 dBi

Beamwidth

25 ° Vertical, 30 ° Horizontal

Polarization

Dual Linear

VSWR

< 1.6

Impedance

50 Ω

Maximum Input Power

50 W

Connectors

RF Connectors

(2) N Female

Physical Parameters

Dimensions

470 x 310 x 50 mm

Weight

1.5 kg

Operating Temperature

-30 °C to 75 °C

Environment

Outdoor

Mounting Method

Pole Mount

Reviews and ratings

Product rating

Gaidis2/22/2026

Pieslēdzāmies pie LMT rūtera lauku reģionā, un interneta ātrums ievērojami palielinājās. Pat vakaros, kad tornis ir visnoslogotākais, ātrums ir 10 reizes lielāks.

Seán8/13/2023

Before installing on an end user site, I tested it against a pair of Iskra P-58's side by side aimed at a distant mast operating on multiple bands. This antenna performed just as well as the Iskra's on the low 800 and 900MHz bands with the signal readings within 1dB apart and similar speed tests. On the upper 1800 and 2100MHz bands, the RSRP readings were over 10dB weaker than the Iskra's readings and delivered about half the download speed on speed tests. The antenna is physically big, larger than two A4 sheets side by side, but very light. It has a single mounting clamp that allows for vertical or horizontal mounting, which can also tilt up and down, It just requires a small wall mount, whereas the Iskra's requires a long pole to mount its separate antennas. It requires a 10mm spanner to fasten the mounting clamp to the antenna and a 13mm spanner to fasten its clamp to a pole.

Viesturs10/27/2022

Antenna works good!

Often purchased together

CC-NM-SM-10-D

World wide delivery.

1-2 day express options.

Economy delivery via courier or post.

Orders dispatched within 24 hours on business days.

Payment

Fast and secure payments via card.

Bank transfers in EUR, USD or GBP.

Special offers for wholesale requests.

Warranty and Returns

30-day withdrawal returns.

Online RMA status for warranty, replacements and repairs.

Extended warranty available.